Farm and Ranch

CattleMaster 480
EcoFount 1
EcoFount 2
OmniFount 1
OmniFount 3
OmniFount 5
OmniFount 2
OmniFount 10
WaterMatic 100

The WaterMatic 100 is a single sided automatic waterer for calves,
cattle and small herds. Ideal for stalls, small pens or paddocks. The
drop in cover is easy to lift for maintenance and cleaning. Trough
slopes towards drain hole for easy cleaning and debris removal.
• No gaskets to crack, tear or leak
• One piece rugged fountain body
• Generous side access panel
• Easy to clean and maintain
• All surfaces slope to drains for easy clean out
• Ideal for individual stalls or pens
• Immersion Heater and Self-Regulating Heat Cable required for freezing
conditions (sold separately)

WaterMatic 150

The WaterMatic 150 is ideal for fence line applications with its small
compact two-trough design. The waterer is fully insulated to keep the
water cool in the summer and provides added protection during the
winter. The drop in cover is easy to lift for maintenance and cleaning.
Trough slopes towards drain holes for easy cleaning and debris
removal.
• No gaskets to crack, tear or leak
• One piece rugged fountain body
• Generous side access panel
• Easy to clean and maintain
• All surfaces slope to drains for easy clean out
• Ideal for a fence line application
• Immersion Heater and Self-Regulating Heat Cable required for freezing
conditions (sold separately)

WaterMatic 300

The WaterMatic 300 is ideal for fence line applications with its two
trough design. The waterer is fully insulated and impact resistant to
your larger herds. The insulation keeps the water cool in the summer
and provides added protection during the winter. The drop in cover is
easy to lift for maintenance and cleaning. Trough slopes towards drain
holes for easy cleaning and debris removal. Drain plugs can be moved
to the valve chamber opening for short-term trough shut-off during
cleaning, when the pen is empty or during excessively cold nights.
• No gaskets to crack, tear or leak
• One piece rugged fountain body with generous side access panel
• Easy to clean and maintain
• All surfaces slope to drains for easy clean out
• Immersion Heater and Self-Regulating Heat Cable for freezing conditions
(sold separately)

Fencing

GALLAGHER B100 CHARGER
  • Powers up to 60 acres or 7 miles multi-wire fence
  • Stores 0.8 Joules of energy.
  • Highly visible low-battery and fence-voltage indicator lights
  • Carrying handle for effortless transportation
  • Weatherproof enclosure to contain battery
  • Battery not included. Requires a 12-volt rechargeable battery (Or two 9-volt batteries)
Solar add on option:
  • Comes with 10-watt solar panel
  • Ideal where no AC power is available
  • Best for areas where weather and snow are not a concern
GALLAGHER B200 CHARGER
  • Powers up to 90 acres/15 miles of multi-wire fence
  • Stores 1.45 Joules of energy
  • Highly visible low-battery and fence voltage indicator lights
  • Carrying handle for effortless transportation
  • Weatherproof enclosure to contain battery
  • Optional 10Watt Solar Panel
GALLAGHER S10 SOLAR FENCE CHARGER
  • Stored Joules: 0.1
  • Distance Powered: Up to 3 miles / 15 acres (single wire)
  • Quickly and easily installed
  • Works up to 3 weeks without the sun
  • Drop resistant and waterproof casing with built-in lightning protection
  • Automatically slows down at night when livestock are less active to conserve battery power
GALLAGHER S16 SOLAR FENCE CHARGER
  • ​Turn on and forget – Energizer will continue to work for up to 3 weeks without sun
  • Quick to install – can be set up easily in any location and moved about as required. The Energizer comes with a rechargeable battery as well as fence and ground leads
  • Super tough, drop resistant, waterproof casing with built-in lightning protection – designed to be left outside, in all weather conditions giving producers confidence that it will keep stock contained
  • Maximize battery life – pulse rate slows at night, when livestock are less active, to save battery power
  • 360 degree mounting on Steel posts for correct orientation toward the sun – allows the Energizer to be mounted on a steel post that is already part of the fence line, regardless of which way the post is facing.
GALLAGHER S40 SOLAR FENCE CHARGER
  • Stores 0.4 Joules of energy
  •  powers up to 25 miles / 80 acres
  • ​​​​​Turn on and forget – with automated battery management, energizer will continue to work for up to 3 weeks without sun
  • Quick to install – can be easily set up in any location and moved about for strip grazing and better pasture management
  • Water resistant case, with convenient carry handle and built in lightning protection – designed to be left outside, rain, hail or shine. Keeps stock contained in all weather conditions
GALLAGHER S22 SOLAR FENCE CHARGER
  • 0.22 Joules of Stored Energy, Self Sufficient
  • Powers up to 40 acres/12 miles
  • Consistent, reliable fence performance with a built in solar panel to charge the battery
  • Quick and easy to set up
  • Can be used for both permanent and portable electric fencing as it can be mounted on a steel post or placed on the ground
  • Long battery life – pulse rate slows at night, when livestock are less active and reduces power in extended low sunlight conditions to save battery power
  • Turn on and forget – the Energizer will work for up to 3 weeks without sun and is capable to power through the harshest winters
  • Designed for outdoor use with weather proof, non-rusting case  and built in lighting protection
  • Easily transportable, with handy carry handle
  • Comes complete with a solar panel, battery and fence/ground lead set.
Heavy-Duty-Pigtail-Steel
  • Lightweight, strong spring steel.
  • UV stabilised plastic for effective insulation.
  • Ultra white insulation and coating with bright orange top for maximum visibility and easy location.
  • Robot welded 70mm (28″) long pointed foot for easy installation.
  • Plastic insulation has sealed end for weather resistance.
LIGHTWEIGHT PIGTAIL
  • Lightweight, strong spring steel.
  • UV stabilised plastic for effective insulation.
  • Ultra white insulation and coating with bright orange top for maximum visibility and easy location.
  • Robot welded 70mm (28″) long pointed foot for easy installation.
  • Plastic insulation has sealed end for weather resistance.
HD TREADIN POST
  • 42″ High, including stake.
  • Highly Visible
  • UV-stabilized plastic treadins with up to 9 lugs for positioning wires and tape to control domestic and wild animals.
  • Simply step into the ground.
  • Secures Polywire or Poly Tape up to 1 1/2 ” wide.
  • Uniquely designed lugs for positive holding and quick release of Polywire or Poly Tape.
  • Made from heavy duty, UV resistant polymer compound for long life.
  • Use two treadins for a stable corner.
NEON TESTER
Color: Orange
Size: 1
Ideal Uses: Testing fencing for faults in the current
DIGITAL VOLT METER
  • Monitors fence voltage and helps trace fence-line shorts and faults
  • The DVM reads the voltage for battery energizers even when the energizers are in Battery Save Mode
  • Powered by one 9V battery with a life of 6-12 months
  • Water resistant
  • Pocket size
GALLAGHER B10 CHARGER
  • Best used for protecting your garden from farm animals!
  • Great for strip grazing, giving the livestock a fresh allocation of pasture each day!
  • Miles Single-Wire Fence: 1.8 mi
  • Miles Mult-Wire Fence: 0.6 mi
  • Approx. Acreage: 6 acres
  • Stored Energy: 0.08 joules
  • Output Energy: 0.06 joules
  • Voltage Rating: 7 kV
FAULT FINDER
  • Multi-mode fault finding tool: Current Meter and Digital Volt Meter (DVM)
  • Convenient pocket size
  • Modern water resistant and impact resistant case
  • Large easy to read LCD display
  • Long life battery – up to 3 years
  • Auto ON/OFF. Activated when fence pulse is detected
  • Switch to change between DVM and Current Meter modes
  • Retractable voltage probe for reading voltage on energizers and other hard to reach areas
  • Micro-chip technology that enables low voltage operation
  • Detachable earth lead
  • All parts fully replaceable
  • Low battery indication
  • When used as a DVM: can be used to measure voltage on all energizer types, measures up to 15KV; use without earth lead for everyday fence voltage reading (earth lead will give more precise readings, particularly for measuring earth voltage.); retractable probe allows easy access to energizer terminals, cut-out switches and other difficult to reach areas
  • When used as a Current Meter: large arrows makes for easy fault finding by showing direction of fault; digital display of current (A) makes for easy detection of faults; bar graph indicating voltage while in current meter mode; cordless operation
M150 110-volt Fencer
  • Powers up to 60 acres/11 miles of multi-wire permanent fence
  • Stored energy: 1.5 Joules
  • Ideally suited for small pastures
GALLAGHER B180 CHARGER
  • Stores 1.8 Joules of energy.
  • Powers up to 90 acres or 16 miles of multi-wire permanent fencing.
  • Built in battery save feature to extend the life of your battery.
  • Effortless to use 5 stage rotary dial to change energizer operating functions.
  • Uses 12V deep cycle rechargeable battery, e.g Marine type (not included)
  • Ready to use with Gallagher solar panels to conveniently charge the battery.
  • Bar graph can be used to indicate battery capacity and output voltage
GALLAGHER B280 CHARGER
  • Stores 2.8 Joules of energy.
  • Powers up to 110 acres or 22 miles of multi-wire permanent fence.
  • Built in battery save feature to extend the life of your battery.
  • Effortless to use, 5 stage rotary dial to change energizer operating functions.
  • Uses 12V deep cycle rechargeable battery, e.g Marine type (not included)
  • Ready to use with Gallagher solar panels to conveniently charge the battery.
  • Bar graph can be used to indicate battery capacity and output voltage
GALLAGHER M300 CHARGER
  • Gallagher M300 Stores up to 3 Joules of energy.
  • Powers up to 85 acres of multi-wire permanent fence.
  • Quickscan Output Voltage bar graph: shows output voltage of the energizer at a glance
  • Best suited for small pastures.
GALLAGHER B280 CHARGER
  • Stores 2.8 Joules of energy.
  • Powers up to 110 acres or 22 miles of multi-wire permanent fence.
  • Built in battery save feature to extend the life of your battery.
  • Effortless to use, 5 stage rotary dial to change energizer operating functions.
  • Uses 12V deep cycle rechargeable battery, e.g Marine type (not included)
  • Ready to use with Gallagher solar panels to conveniently charge the battery.
  • Bar graph can be used to indicate battery capacity and output voltage
GALLAGHER M600 CHARGER
  • Stores 6 Joules of energy
  • Powers up to 150 acres of multi-wire permanent fencing
  • Quickscan Output Voltage bar graph, shows output voltage of the energizer at a glance
  • Best suited for medium-sized pastures with electric fencing
GALLAGHER B60 CHARGER
  • 12 volt battery compatible.
  • Powers up to 40 acres/5 miles of multi-wire permanent fence
  • Stores 0.6 Joules of energy.
  • Use with a 12-volt, deep-cycle battery
  • Battery is not included
  • Compatible with a 5 Watt solar panel
110-volt Fencer Rustler
  • Powers up to 20 acres/3 miles of multi-wire fencing
  • Stored energy: .5 Joules
  • Ideally for safely controlling domesticated livestock around your farm
M100 Wrangler Fencer
  • Powers up to 30 acres/6 miles of multi-wire permanent fence
  • Stored energy: 1.0 Joules
  • Low Impedance
GALLAGHER M120 CHARGER

Clean Fence: 15 miles / 60 acres​
Typical Fence:​ 6 miles​ / 30 acres
Stored Energy (Joules): 1.2 J
Output Energy (Joules): .63 J

  • Affordable: Electric fence is 50% less expensive to build and maintain than barbed wire.
  • Easily constructed
  • Low maintenance
  • Lightweight and portable
  • Durable: due to low physical contact
  • Easily modified or expanded
  • Keeps animals in and predators out
GALLAGHER M60 CHARGER
  • Robust and reliable made to last with tough outer casing and built in lightning diverter
  • Easy to use and install with simple fence terminals and hassle free mounting
  • Check power at a glance with the power on indicator
  • Ideal for small pastures
  • 2 year warranty
  • UL Approved

Clean Fence: 10 miles / 40 acres
Typical Fence: 3 miles / 20 acres
Stored Energy:   .6
Output Energy:  .34 J

GALLAGHER M160 CHARGER
  • Robust and reliable made to last with tough outer casing and built in lightning diverter
  • Easy to use and install with simple fence terminals and hassle free mounting
  • Check power at a glance with the power on indicator
  • Ideal for small pastures
  • 2 year warranty

Clean Fence:  30 miles / 100 acres
Typical Fence: 11 miles / 60 acres
Stored Energy (Joules): 1.6
Output Energy (Joules): .86

GALLAGHER M10 CHARGER
  • Robust and reliable made to last with tough outer casing and built in lightning diverter
  • Easy to use and install with simple fence terminals and hassle free mounting
  • Check power at a glance with the power on indicator
  • Ideal for small pastures
  • 2 year warranty
  • UL Approved

Clean Fence2 miles / 10 acres
Typical Fence: 0.5 miles / 3 acres
Stored Energy (Joules): 0.1
Output Energy (Joules): 0.07

GALLAGHER M30 CHARGER
  • Robust and reliable made to last with tough outer casing and built in lightning diverter
  • Easy to use and install with simple fence terminals and hassle free mounting
  • Check power at a glance with the power on indicator
  • Ideal for small pastures
  • 2 year warranty
  • UL ApprovedClean Fence: 5 miles / 20 acres
    Typical Fence: 2 miles / 10 acres
    Stored Energy (Joules): .3
    Output Energy (Joules): .15
Insulated Line Post
  • ​​Easy to transport – Light, smooth and compact
  • Long life – High quality materials ensure a long life. A UV protected polyethylene sheath protects fiberglass from UV damage
  • High strength clips – Glass filled nylon “snap-on” clips form a reliable connection with 160 lb holding force – typically twice as strong as most conventional wood or steel post insulator systems. Insulator Line Post Clips sold separately
  • Flexible posts – The strong yet flexible solid fiberglass core enables the post to flex when the fence is impacted, preventing broken or bent posts, and minimizing animal injury
  • Multiple configurable wire heights – Pre-formed wire attachment locations enable many different fence configuration
  • Fast and simple install – The composite post can be easily installed. Wires simply clip onto the post, making it significantly faster than stapling or pinning on traditional post insulator systems
  • Strong ground anchoring – The multi-flanged foot design ensures strong ground anchoring, reducing the likelihood of post heave or post misalignment over time
  • Note: Post height measured from ground
Standard T-Post 5″ Claw Offset Insulator

Gallagher’s Standard T-Post 5″ Claw Offset Insulator snaps on to T-Posts with ease. Molded of high density polyethylene with UV inhibitors for all-weather performance. This insulator’s claws fit all common wire types.

  • High density polyethylene
  • UV inhibitors
  • Color: Black
Standard Donut Insulator

Gallagher’s Standard Donut Insulators are frequently used at corners, dips and rises. Molded of high density polyethylene with UV inhibitors for all-weather performance. Attach them by tying them to posts with wire or mount them on a lag screw. Wire can be run through the hole or on the outer groove of the insulator.

  • Black high density polyethylene
  • UV inhibitors
Standard Wood Post Nail-on Claw Insulator

The Standard Nail-on Claw Insulator is designed for wood posts. Extends wire 1″ from post. Flexible base fits round and flat sided posts. Single headed nails supplied, easily removed. Molded of high density polyethylene with UV inhibitors.

  • Extends wire 1′ from post
  • UV inhibitors
  • High density black polyethylene
Standard T-Post Claw Insulator

This Gallagher Standard Insulator works with T-Posts. Large flange prevents arcing. Solid claw holds electric fence wire. Snaps on post. Molded of high density polyethylene with UV inhibitors for all-weather performance.

  • High density polyethylene
  • UV inhibitors
  • Color: Black
Wood Post Screw-in Ring Insulator

Effortless install (no staples or nails required) to screw into wood post. Angled slot allows quick securing and safe holding of wire. No need to create pilot hole first, simply screw this insulator into soft wood. Made from durable UV resistant plastic with a zinc-coated wood screw.

  • ​​Easy to install – screw insulator directly into wooden post
  • Made from strong high density, long lasting UV resistant plastic
  • Angled slot allows quick, secure wire hold
HD T-Post Topper Insulator

Sharp edged t-posts can injure horses and livestock. Our Heavy Duty T-Post Topper Insulator can give you peace of mind as they protect animals from sharp edges.. Safe and flexible – add a single electric wire/tape/braid to the top of existing steel posts using this protective cap or attach wire/braid to the top. This top accommodates 3/8″ wire. The front accommodates 1 1/2″ tape and 3/8″ wire.

  • Designed to fit over the top of a T Post or Y-Post
  • Securely holds electric wire, tape or braid
  • Made from UV resistant plastic for long life and strength
  • Flexible wire attachment options
HD Multi-Post Pinlock 5″ Offset Insulator

World’s first multi-post pinlock offset insulator. This multi-post insulator is able to be attached to both sides of a T-Post or nailed to a wooden post. It has a pinlock clip that allows for easy fence construction.

  • Extends wire from post to keep animals away from fence
  • Sturdy pinlock for superior wire retention that allows for easy fence construction and wire removal
  • Accommodates Equine Fence and braid products
  • Made of high density, UV resistant polyethylene plastic
  • Recommended for use on level ground.
Porcelain Ring Insulator

Fire resistant with a long life, high quality white glaze finish porcelain donut shaped insulator is 1.5″ in diameter.

  • Fire-resistant ​i​nsulator
  • 1 1/2″ diameter
  • High-quality, white-glaze finish
  • Use for change of direction in permanent fences
Strain Insulator – White

Strongest, long term end strain insulation for high tensile permanent electric fencing.

  • Registered design for superior handling and strength
  • Ideal for long strains of permanent fence
  • Made from hard wearing, long life UV resistant material
High Strain Insulator Kit

Simplest option for end strain insulation; use at one end on shorter fence lengths.

  • ​Long life Super Strain Insulator with pre-attached stainless steel rope
  • Simple install – no wire tying or special tools required
  • Fits up to 8” post​
HD T-Post Wide Jaw Pinlock Insulator

Heavy-duty insulator for all T-Posts. Unique snap on design that fits securely and requires no tools to install! The wide jaw accommodates equine fence and braid products.

  • Heavy-duty Insulator for all steel T-posts
  • Designed to fit snugly and prevent arcing
  • Made from UV-resistant plastic for strength and long life
  • Clips on to any size steel post
Insulated Wire Strainer Kit

No wire tying, fast and simple. Includes all three end strain elements – insulator, strainer and steel rope. Simply slide over the post and you’re done.

  • Fast and simple install with no wire tying or tools required
  • Strong, long life stainless rope for long life
  • For corner or end posts
  • Fits up to 8” post
Wood Post 3-Way Gate Anchor

Super strong live anchor for up to three gates coming to a junction. Ideal for use in gateway systems at the intersection of multiple paddocks. Heavy duty, snap on plastic insulator. Can be nailed to wooden posts or screwed to wood or vinyl posts. Also snaps onto t-posts.

  • ​​Ideal in a multi-paddock situation
  • Power connects to bolt from below the plate
  • Galvanized mild steel plate for long life
  • 3-Anchor points allow for additional gate connections
  • All edges rounded to prevent stock damage
L-Shape Joint Clamp

Clamps multiple high tensile wires together for excellent electrical connection.

  • Ensures good conductivity and effective animal control is maintained
  • Heavily galvanized for long life
  • Dropped shoulder enables easy placement onto wire
  • Suitable on all size wires up to 8 gauge
  • Sold as a pack
Insulated Wire Strainer

Combined end strain insulator and strainer. Simply tie onto strainer post and wind fence wire onto spool.

  • Long life galvanized steel frame
  • Spool designed for easy set up and wire alignment 12 tooth spool for fine adjustment and easy tightening action
  • Increased spool hub thickness provides extra strength
  • Robust, high quality spring loaded locking clip
  • Tighten with Ratchet Handle
Wire Strainer

Ratchet style wire strainer that can also be used in-line by threading through strainer instead of tying a knot.

  • Versatile use – traditionally for end of line straining or for in line straining by threading wire through strainer instead of tying an extra knot
  • Long life galvanized steel frame
  • Robust, high quality spring loaded locking clip
  • Increased spool hub thickness provides extra strength 12 tooth spool, for fine adjustment and easy tightening action
  • Tighten with Ratchet Handle
In Line Wire Tightener

Ideal for straining old fences and for tensioning trellising wires. The tightener fits over the wire for mid-fencing straining, increasing effectiveness of strain by pulling from both directions.

  • Strong, lightweight, rust resistant construction
  • Use with Gallagher Permanent Wire Tightener Handle or Gallagher Rapid Wire Tightening Tool
  • The large number of clip positions allows correct wire tension to be obtained
  • Ideal for straining old fences and for tensioning trellising wires
  • No need to cut wire before straining
  • Can be used to join wire
Wire Tightener Handle

Tightener handle for Gallagher inline wire strainers

  • Use with Permanent Wire Tightner to tighten or loosen wire tighteners
  • Zinc plated for long life
Electric Bungy Gate

Pre-assembled gate – bungy cord stretches to twice its length and is ideal for on/off laneways. Made with stainless steel strands for maximum life and electrification.

  • Easy to set up, pre-assembled gate – ideal for on/off gateways
  • Bungy cord made from quality UV resistant rubber and can be stretched to twice its length (from 11 1/12 to 23′)
  • Made with four stainless steel strands for maximum life and electrification
  • Pinlock insulator’s jaw strength can withstand significant tension and ensures a strong dead end connection
  • Handy three-Way Gate Anchor allows for additional, secure gate connections
  • Safe use with high visiblity handle with large shields
Electric High Visibility Spring Gate

Ultra white for high visibility to stock and humans.

   All metal galvanized and powder coated white.

 

  • Insulated Gate Handle has large protective shields and a galvanized non-turning hook.
  • Can be used on up to 16 1/2′ gateways without overstretching.
  • Retracts to hanging position.
  • Pre-assembled for convenience.
  • Kit includes: Insulated Gate Handle, Galvanized White Spring, Gate Anchor Insulator x 2, galvanized mild steel Anchor Plate, Joint Clamp.
Heavy Duty Gate Handle

Flat hook for maximum electrification and extra safe handle which pulls out on impact. Heavy duty tension spring.

  • Heavy duty tension spring
  • Large shield on handle to protect from shocks
  • Handle manufactured with UV stabilized plastic
Insulgrip

Insulated hook handle for quick and secure portable fence attachment to permanent electric fence wire.

  • ​​Easy to handle, large moulded insulated hook
  • Tough long life material
  • Streamlined design and bright color allows easy retrieval through pasture.
Poly Wire

Reliable, cost effective wire for controlling animals behind shorter portable electric fences. Tape width is 1/16″

  • ​For cost effective portable electric fencing on shorter fence lines
  • Ideal for use in windy conditions
  • Made from hard wearing UV resistant materials with x6 stainless steel strands
  • Resistance:* 6000 Ohms/km or 9656 Ohms/mile *Resistance refers to the conductivity of the product. Low resistance (i.e. 110 Ohms/km) means higher conductivity (less resistance to the electric pulse means it can travel further down the fence line).
Turbo Wire

Made from 9 mixed metal strands, Gallagher’s Turbo Wire has 40Xs more conductivity than Poly Wire and is best suited for distances beyond 1/4 mile where extreme power is required. Built to be reliable, super-conductive, long lasting and highly portable… with Turbo Wire, you can also rest assured that its ultra-white color makes it highly visible to both people and animals.

  • Reliable, long life wire with turbo conductivity for superior animal control on portable electric fences
  • Ideal for use in windy conditions
  • Heavy duty wire with mixed metals (x6 stainless steel and x3 copper strands) for turbo conductivity and long life
  • Superior shock delivery with 40x conductivity of Standard Poly Wire
  • Made from hard wearing UV resistant materials
  • Resistance: 130 Ohms/km – Resistance refers to the conductivity of the product. Low resistance (i.e. 110 Ohms/km) means higher conductivity (less resistance to the electric pulse means it can travel further down the fence line)
Turbo Braid

Heavy duty, woven material for easy handling with turbo conductivity for superior, long life animal control.

  • Heavy duty braid with mixed metals (x6 stainless steel and x3 copper strands) designed not to overstretch or tangle so it’s also easy to handle
  • Superior shock delivery with 19x conductivity of standard poly wire
  • Ideal for controlling all animals using portable and semi-permanent electric fences over 200m
  • A safe and highly visible product so also recommended for semi-permanent horse fencing
  • Stripes discourage animals from challenging the fence
  • Made from hard wearing UV resistant materials.
Aluminum Wire

The most effective electric wire on the market with a lifetime guarantee against rust.

  • This “User-Friendly Wire” will not rust, is easy to install and is the most effective electric wire on the market. Carries a lifetime guarantee against rust
  • Conducts electricity four times better than steel wire
  • Aluminium is one-third the weight of steel
  • Greater flexibility. Can be hand twisted and tied without the use of special tools
  • Easy to re-spool and ideal for controlled grazing​
Warning Sign
Live Fence Indicator

For instant reassurance that your fence is working. Place permanently on your fence line and simply look for the flash (flashes with each pulse of the Energizer) when you pass by. No batteries required.

To setup, clip onto the fence wire and push the lead into the ground. If the voltage drops below 3000V, the Live Fence Indicator starts to flash intermittently and if the voltage drops below 2000V, the Live Fence Indicator will stop flashing altogether.

  • ​Install at strategic locations for convenient visibility including driveways and near the home
  • Highly visible LED flashes to indicate fence is working effectively. Is easily visible during day and night (up to 3,000′ at night)
  • Low voltage cut off so will not flash if the fence voltage is too low
  • Quick and easy installation, simply place ground stake in the ground and clip onto fence wire or tape
  • Water and UV resistant for long life
  • No batteries required. Uses power from the fence
Lightning Diverter

Gallagher recommends all permanent Energizers be fitted with a lightning diverter to help protect from lightning damage. The Lightning Diverter has two terminals for attaching wires and leads from each terminal that are set with a wide enough gap to prevent the normal energizer voltage flow from arcing across, but close enough to allow a lightning voltage spike to jump easily across and pass to ground.

  • ​​Diverts lightning from the fence to the ground to protect the energizer
  • Long life guaranteed – able to withstand multiple lightning strikes
  • Versatile – can be used with any energizer
  • Easy attachment to fence post​
Cut Out Switch

Cut-out switches are a time saving tool used to turn electricity off along the fenceline while troubleshooting or making repairs. Install one on each corner to eliminate a trip back to the energizer. Unused pastures and lower electric fence wires with high vegetation may also be easily cut off to increase fence voltage.

  • H​​igh quality electrical contacts to handle high voltages
  • Highly visible on/off switch for status checking at a glance
  • Fully sealed, weatherproof & dirt resistant for long life and durability
  • Made from impact resistant materials and UV stabilized plastic
  • Fits securely onto any post. Mounting screws supplied​
High Tensile Wire Cutter
  • ​​9″ Wire Cutter for high tensile 12.5 guage
  • Safety latch
  • Use of safety glasses recommended
  • Not recommended to twist while cutting due to potential jaw damage
  • 2 year warranty
Fencing Plier and Wire Cutters
  • 8″ pliers for cutting, stripping and bending high-tensile wire
  • Ensures minimum wire damage
  • Comfort grip, plastic-covered handle
2″ Medium T-Post Pounder

Weight: 14 LBS

Length: 28″

Handle Length: 6″

2 1/2″ H.D. T-Post Pounder

Weight: 26 LBS

Length: 36″

Handle Length: 24″

 2PT 5″ HW Commercial Barbwire

Wire Thickness: 12/2 Guage

Barb Style: 2-Point

Barb Spacing:5″

Shape: Round

Reel Length: 1320ft

 HW Commercial Barbless Wire

Wire Thickness: 12/2 Guage

Reel Length: 1320ft

Utility Fabric

We Have Multiple Sizes!

1-20 72″ Poultry Netting

Wire Thickness: 20 Gauge

Mesh Spacing: 1″

Roll Height: 72″

Roll Length: 50ft

 2 x 2 x 24″ Hardware Cloth 19GA

Mesh Spacing: 2×2″

Roll Height: 24″

Roll Length: 100ft

Wire Thickness: 19 Gauge

5 1/2′ 1.33 HW Brand T-Post

Page Under Construction, Thank you for your patience and be sure to check back for more Products!

Page Under Construction, Thank you for your patience and be sure to check back for more Products!

223 Galvanized Round End Tank (approx. 71 gal.)
224 Galvanized Round End Tank (approx. 103 gal.)
225 Galvanized Round End Tank (approx. 134 gal.)
226 Galvanized Round End Tank (approx. 169 gal.)
328 Galvanized Round End Tank (approx. 294 gal.)
3210 Galvanized Round End Tank (approx. 377 gal.)
228 Galvanized Round End Tank (approx. 224 gal.)
214 Galvanized Round End Sheep Tank (approx. 44 gal.)
216 Galvanized Round End Sheep Tank (approx. 70 gal.)
4′ Galvanized Round Tank (approx. 165 gal.)
5′ Galvanized Round Tank (aprox. 265 gal.)
6′ Galvanized Round Tank (approx. 389 gal.)
7′ Galvanized Round Tank (approx. 535 gal.)
8′ Galvanized Round Tank (approx. 706 gal.)
10′ Galvanized Round Tank (approx. 1,117 gal.)
224 Galvanized Round End Tank w/Drinker (approx. 100 gal.)
214 Poly Round End Sheep Tank (approx. 50 gal.)
224 Poly Round End Tank (approx. 100 gal.)
226 Poly Round End Tank (approx. 150 gal.)
223 Poly Round End Tank (approx. 65 gal.)
225 Poly Round End Tank (approx. 125 gal.)
328 Poly Round End Tank (approx. 300 gal.)
8′ Poly Round Tank (approx. 625 gal.)
Water Boy Tank (approx. 30 gal.)
Empty section. Edit page to add content here.

Page Under Construction, Thank you for your patience and be sure to check back for more Products!

OPEN BOTTOM HAY FEEDER

Sioux Steel’s Open Bottom Hay Feeder features rounded 9″ x 20″ mud legs. Add the optional polyethylene kick shield to limit feed waste.

Hi-tensile, 50,000 psi steel tubing and powder coated. 8′ diameter with slant bars. 3 sections bolted together.

BULL HAY FEEDER

Handles big and small animals like bulls and cows. Allows for comfortable feeding 8.5” under the top rung. Tapered top diameter limits waste but still accepts most bale sizes.

Hay shield keeps feed in and calves out. Smooth fit on kick shield for safety. Hi-tensile, 50,000 psi steel tubing and powder coated.

3 sections bolted together. 2″ frame and 1.66″ slant bars.

CLOSED BOTTOM HAY MAX FEEDER

With 15 feed openings, the Closed Bottom Hay Max is the perfect solution for feeding livestock and getting the most out of your hay bales. The 2″ frame with 1.66″ slant bars accommodates large round bales and allows cattle easy access to feed. Hi-tensile, 50,000 psi steel tubing and powder coated. 3 piece assembly.

CALVING PEN CARE CENTER

Most user-friendly calving pen on the market! Cattlemen from all over the country say they would not be without our Sioux gold quality calving pen care center ever again.

Sioux Steel’s calving pen fits well in just about any barn setup or working facility. Save the calf on that difficult heifer this year, you will see the results! Versatile and expandable, easily add a section later if you decide to expand the herd and create your own modular facility.

All sides contain an in-and-out swing gate and latch for easy access by any direction. Easy assembly connector clips eliminates nuts and bolts.

HEAD GATE (SIOUX STEEL) – AUTOMATIC

The self catching, Automatic Head Gate has a spring cushion and is mounted on squeeze chutes to reduce impact when the animal runs into the head gate. Left or right handed operation.

Quickly and easily adjusted automatic, self-catch head gate. When a cow goes through, the head gate resets itself automatically. Head gate is adjustable from 4” to 10.5”.

VICTORY 2″ TALL GATES
  • Heavy-duty Z-bar vertical braces.
  • 62″ tall, 7 bars, rounded tops.
  • Prairie gold powder coating.
  • Patented t-slot latch and 36″ chain.
  • 16 gauge, 50,000 PSI structural steel tubing
GROUND MINERAL FEEDER

Sioux Steel’s Ground Mineral Feeder is 15” high and 38” wide.

3 compartments allow for 200 lbs. of mineral. Feeder can be anchored in 3 different locations for added stability. The low profile virtually eliminates tipping or spilling.

  • Single flap top promotes longer usage.
  • Made with high quality polyethylene.
  • The heaviest ground feeder available.
UPRIGHT MINERAL FEEDER

Sioux Steel’s Upright Mineral Feeder has a 28” x 24” beveled hood opening. Full 360° rotation protects expensive supplements from the elements. Tank constructed of polyethylene to eliminate rust.

BUNK FEEDER – 10′

The 10′ Feed Bunk is shipped completely assembled and holds 1/2 ton of feed for livestock. Hay rack is optional.

  • Round deep dish hopper.
  • Rounded skid legs.
  • 18 gauge, 50,000 psi liner.
  • Heavy 16 gauge, 50,000 psi steel tubing.

Stands up to dairy, feedlot and pasture use. Welded into one piece. Lip rolled to the outside means no feed build up, fresher feed and no mold. Formed so bunks can be set end-to-end or stacked for storage.

Empty section. Edit page to add content here.

Page Under Construction, Thank you for your patience and be sure to check back for more Products!

Sprayers

ECONOMY SPOT SPRAYER

• Lithium Ion Battery Powered Handgun/ Pump With Continuous Use Over 1 Hour
• Sprays Up To 8 Gallons On A Single Charge
• 2.5 Hour Recharge Time
• Roundup® Ready

15 GALLON ECONOMY SPOT SPRAYER

• 96” Lead Wire With Quick Coupler, In-Line Switch & Deluxe Battery Clips
• Full Drain Out Capability With Molded-In Drain Port, Cap & Tether
• 35 PSI
• Roundup® Ready

2-NOZZLE QUICK RELEASE ATV SPRAYER

96” Lead Wire With Quick Coupler, In-Line Switch & Deluxe Battery Clips
• Quick Release Feature Allows Operator To Quickly Install / Remove Spray Boom To
Convert From Spot To ATV Sprayer
• Saves Space For Easier Storage
• Innovative Manifold That Controls Pressure Adjustment and Boom Attachment
• Roundup® Ready

LG-25-HV
  • 25 Gallon Corrosion Resistant Polyethylene Tank
  • Full Drain Out Capability With Molded In Drain Port, Cap & Tether
  • Full Length Drain Sump
  • 5” Fill Lid With Tether
  • Both Gallon And Liter Fluid Volume Indicator
  • Molded Wand Clips
  • 12 Volt (Demand) Diaphragm
    3.8 G.P.M. Pump
  • 45 P.S.I.
  • Deluxe Pistol Grip Handgun With Adjustable Pattern Tip
  • Max. Horizontal Throw – 35 Ft.; Max Vertical Throw – 26 Ft.
  • 15 Ft. Handgun Hose
  • Ready For Roundup®
25 GALLON DELUXE SPOT SPRAYER

96” Lead Wire With Quick Coupler, In-Line Switch & Deluxe Battery Clips
• Lower Tank Profile For Improved Stability
• Full Drain Out Capability With Molded-In Drain Port, Cap & Tether
• Innovative Manifold That Controls Pressure Adjustment and Boom Attachment
• Roundup® Ready

40 GALLON SPOT SPRAYER

96” Lead Wire With Quick Coupler, In-Line Switch & Deluxe Battery Clips
• Full Drain Out Capability With Molded-In Drain Port, Cap & Tether
• Pressure Gauge – Adjustable Pressure From 0 – 60 PSI
• Innovative Manifold That Controls Pressure Adjustment and Boom Attachment
• Roundup® Ready

LG-3025
  • 25 Gallon Corrosion Resistant
    Polyethylene Tank
  • 3.8 GPM, 12 Volt Diaphragm
    Demand Style Pump; 45 PSI
  • Adjustable Pressure
  • Pressure Gauge – Gylcerin Filled
  • Handgun With Adjustable Pattern
    Tip & 15’ of Hose
  • Max. Horizontal Throw – 35 Ft.;
    Max Vertical Throw – 26 Ft.
  • Universal Mounting Brackets Fit
    Most ATV Cargo Racks
  • Nozzles Can Be Adjusted To Spray
    Right, Left, Center or All Three
  • Nozzles Can Be Adjusted Up Or Down Depending On Spraying Needs
  • FULL 30 FT. SPRAYING SWATH
  • Ready For Roundup®
QUICK RELEASE BOOMLESS ATV SPRAYER

96” Lead Wire With Quick Coupler, In-Line Switch & Deluxe Battery Clips
• Quick Release Feature Allows Operator To Quickly Install / Remove
Spray Boom To Convert From Spot To ATV Sprayer
• Saves Space For Easier Storage
• Innovative Manifold That Controls Pressure Adjustment and Boom Attachment
• Roundup® Ready

Empty section. Edit page to add content here.

Page Under Construction, Thank you for your patience and be sure to check back for more Products!

75CC – Cast Drill Point – A Series

Fits John Deere 9400. Roll pin required. Adalloy chromium carbide point. Improved ground penetration.

99CC – DRILL POINT-JD, CRUSTBUSTER, GREAT PLAINS

Fits John Deere, Crustbuster, AcraPlant, Great Plains, Mighty Handy with V Groove. Adalloy Chromium Carbide Point. Improved Ground Penetration.

505 – CHISEL SHOVEL 4″ WIDE 1/4″ THICK

15-1/2″ Long. 4” Wide. 2-1/4” to 2-1/2” hole center. 1/2”bolt size. 1/4″ thick. Plain.

45522 – CHISEL SPIKE REVERSIBLE 2″X17″ 5/8″ HOLES

For Chisel Plows. 2″ Wide. 17″ Long . Thickness: 5/8″. Bolt Size: 1/2. Hole Spacing” 2-1/4″

CC01 – CULTIVATOR POINT 3/8″ HOLES

5/16” Thick. 11” length. 1-3/4” wide. 3/8″ bolt size. 1-3/8″ to 1-3/4″ hole spacing. Fits spring tooth harrows, field cultivators and row crop cultivators

S32-0001 – DANISH S-TINE POINT-REVERSIBLE 1-1/2″

1-1/2″ point.

1/4″ thickness.

Designed to fit Danish S-Tine and other field preparation equipment of this type.

Require 3/8″ x 1-1/2″ elliptical head bolt (H10 type).

Dimple to protect bolt head. Heat-treated.

ST11 – SPRING TOOTH HARROW POINT- 2″ X 11″ 3/8″ HOLE

2″ w x 1/4″ t x 11″ l. Bolt size is 3/8″. Hole spacing is 1-1/4″ to 2-1/4″. Plated and sharpened for better wear. Oil quenched and heat treated. Fits field cultivators, spring tooth harrows and row crop cultivators.

ST20 – SPRING TOOTH HARROW POINT- 2″ X 11″ 3/8″ HOLE

2″ w x 3/8″ t x 11″ l. Bolt size is 3/8″. Hole spacing is 1-1/4″ to 2″. Heavy swedged nose. Plated and sharpened for better wear. Oil quenched and heat treated. Fits field cultivators, spring tooth harrows and row crop cultivators.

ST21 – SPRING TOOTH HARROW POINT- 2″ X 11″ 7/16″ HOLE

2″ w x 3/8″ t x 11″ l. Bolt size is 7/16″. Heavy swedged nose. Plated and sharpened for better wear. Oil quenched and heat treated. Fits field cultivators, spring tooth harrows and row crop cultivators.

TC125L – CHISEL POINT TWISTED- 3″ X 22″ LEFT

1-Piece, Left. 3″ wide, 22″ long, 1/2″ thick. Fits all high clearance chisel plows. Bolt size is 1/2″, Hole Spacing: 2-1/4″ to 2-1/2″.

TC125R – CHISEL POINT TWISTED- 3″ X 22″ RIGHT

1-Piece, Right. 3″ wide, 22″ long, 1/2″ thick. Fits all high clearance chisel plows. Bolt size is 1/2″, Hole Spacing: 2-1/4″ to 2-1/2″.

W16-0801 – RAKE WHEEL RH- SITREX, H&S, NH, M&W

Fits Case, H&S, M&W, New Holland, Sitrex, Westward and Others. Cream Color.

Heavy duty tine diameter .275″. Overall diameter is 55″.

Replacement Tine part number is T16-0815D.

1622C – Wheatland Sweep – 22 Series

16″ Plain Sweep. 1/4” thickness with a 50 degree stem angle. Uses a 7/16” bolt. 2-1/4 hole spacing. Medium crown. Constant width. Designed to fit Anderson, Case-High Clearance, Cockshutt, CCIL, Degelman, Frigstad, Glencoe, Graham – 600 Series, John Deere – 650, 1100, 1600, Krause, Landoll, Massey, Mel-Cam, White and Others With 22″ Shanks.

1822C – Wheatland Sweep – 22 Series

18″ Plain Sweep. 1/4” thickness with a 50 degree stem angle. Uses a 7/16” bolt. 2-1/4 hole spacing. Medium crown. Constant width.

Designed to fit Anderson, Case-High Clearance, Cockshutt, CCIL, Degelman, Frigstad, Glencoe, Graham – 600 Series, John Deere – 650, 1100, 1600, Krause, Landoll, Massey, Mel-Cam, White and Others With 22″ Shanks.

14225C – CHISEL SWEEP 14″ – JD & OTHERS

14″ Plain sweep. 1/4″ thickness. 50 degree stem. 1/2″ bolt size. 2-1/4″ hole spacing. Medium crown. Constant width. Designed to fit Figstad, Graham, Hiniker, John Deere, Leon and Mohawk.

14225GC – CHISEL SWEEP 14″ – CIH & OTHERS

14″ Plain Sweep. 1/4” thickness with a 47 degree stem angle. Uses a 1/2” bolt. 2-1/4 hole spacing. Medium crown. Constant width. Designed to fit Anderson, Case, Glencoe, Geisler and Massey-Harris.

16225C – CHISEL SWEEP 16″ – JD & OTHERS

16″ Plain sweep. 1/4″ thickness. 50 degree stem. 1/2″ bolt size. 2-1/4″ hole spacing. Medium crown. Constant width. Designed to fit Figstad, Graham, Hiniker, John Deere, Leon and Mohawk.

16225GC – CHISEL SWEEP 16″ – CIH & OTHERS

16″ Plain Sweep. 1/4” thickness with a 47 degree stem angle. Uses a 1/2” bolt. 2-1/4 hole spacing. Medium crown. Constant width. Designed to fit Anderson, Case, Glencoe, Geisler and Massey-Harris.

18225C – CHISEL SWEEP 18″ – JD & OTHERS

18″ Plain sweep. 1/4″ thickness. 50 degree stem. 1/2″ bolt size. 2-1/4″ hole spacing. Medium crown. Constant width.

Designed to fit Figstad, Graham, Hiniker, John Deere, Leon and Mohawk.

18225GC – Wheatland Chisel Plow Sweep – 225G Series

18″ sweep. 1/4” thickness with a 47 degree stem angle. Uses a 1/2” bolt. 2-1/4 hole spacing. Medium crown. Constant width. Designed to fit Anderson, Case, Glencoe, Geisler and Massey-Harris.

92407 – FIELD CULTIVATOR SWEEP 7″- CIH,JD,DMI

7″ sweep. Designed to Fit Bourgault, Crustbuster, D.M.I., Harris, Hesston, Hiniker, IHC Vibra Shank, Ingham, John Deere 960 Series, Kent, Kewanee, Landoll, Massey Ferguson, Sunflower and Wilrich. 1/4″ Thick. 47 degree stem angle. 7/16″ bolt size and 1-3/4″ hole spacing.

92409 – FIELD CULTIVATOR SWEEP 9″- CIH,JD,DMI

9″ sweep. Designed to Fit Bourgault, Crustbuster, D.M.I., Harris, Hesston, Hiniker, IHC Vibra Shank, Ingham, John Deere 960 Series, Kent, Kewanee, Landoll, Massey Ferguson, Sunflower and Wilrich. 1/4″ Thick. 47 degree stem angle. 7/16″ bolt size and 1-3/4″ hole spacing.

93409 – Field Cultivator Sweep – 934 Series

9″ sweep. Constant Width. Designed to fit Allis Chalmers – Early, Brady, Case, Culkins, Glencoe, Kewanee, Massey Ferguson, Oliver, Anderson, Bush Hog, Cockshutt, Ford, John Deere, Krause, Morris and White. 1/4″ thick. 47 degree stem angle. 3/8″ bolt size. 1-3/4″ spacing.

CS505 – Chisel Sweep – CS Series

7″ sweep. 5/16” thickness with a 50 degree stem angle. 1/2″ bolt size. 2-1/4” hole spacing. Use in place of chisels for more soil movement.

IH14C – Wheatland Sweep – IH Series

14″ sweep. 1/4” thickness with a 43 degree stem angle. Uses a 1/2” bolt. 2-1/4 to 2-1/2” hole spacing. Medium crown. Designed to fit IHC models 10, 50, 55; CCIL 203 & 204, Morris and Wilrich.

S32-0016 – DANISH S-TINE SWEEP- 2-3/4″ DUCKFOOT

2-3/4″ duckfoot. 1/4″ thickness. Designed to fit Danish S-Tine and other field preparation equipment of this type. Require 3/8″ x 1-1/2″ elliptical head bolt (H10 type). Dimple to protect bolt head. Heat-treated. *Made In Iowa.

S32-0019 – DANISH S-TINE SWEEP- 7″ V-DESIGN

7″ sweep. 1/4″ thickness. Designed to fit Danish S-Tine and other field preparation equipment of this type. Require 3/8″ x 1-1/2″ elliptical head bolt (H10 type). Dimple to protect bolt head. Heat-treated. *Made In Iowa.

S32-0018 – DANISH S-TINE SWEEP- 4″ V-DESIGN

4″ v-design. 1/4″ thickness. Designed to fit Danish S-Tine and other field preparation equipment of this type. Require 3/8″ x 1-1/2″ elliptical head bolt (H10 type). Dimple to protect bolt head. Heat-treated. *Made In Iowa.

T16-0001 – DANISH S-TINE- STD DUTY 3/8″ x 22″

3/8″ x 22″ x 1-1/4″. Standard tine, replaces P5215. S-Tines and clamps are made to demanding OEM specifications. Tines are constructed of high quality steel with rounded edges – shot peened and painted black. For all S-Tine Danish Cultivators.

T16-0004 – DANISH S-TINE- HD LONG 1/2″ x 26″

1/2″ x 26″ x 1-3/4″. Heavy-duty long tine, replaces P5415. S-Tines and clamps are made to demanding OEM specifications. Tines are constructed of high quality steel with rounded edges – shot peened and painted black. For all S-Tine Danish Cultivators.

Behlen Drag Harrow We have Three sizes!

The Behlen Country Drag Harrow is built with heavy 1/2″ x 4″ tines and heavy seamless draw bar. They can be easily reversed to allow for less aggressive leveling. Some of the more common uses are: leveling riding arenas, preparing seed beds, reconditioning driveways, incorporating broadcast seeds, spreading manure in pastures, and beach conditioning. Coated with our premium powder coat paint.

Drag Harrow 96″ x 60″

Item: 3018263

Color : Black

Width : “

Height: 96

Length: 60

Weight : 265 lb

Drag Harrow 72″ x 60″

Item : 3018264

Color : Black

Width : “

Height : 72

Length: 60

Weight : 194 lb

Drag Harrow 48″ x 48″

Item : 3018371

Color : Black

Width : “

Height : 48″

Length: 48

Weight : 124 lb

5′ Sub Compact Grader Blade

The Sub Compact Grader Blade is ideal for many applications including driveway maintenance, snow removal, dirt and gravel spreading and much more!

Item : 80110710ORG

Color: Orange

Width: “

Height : “

Length: 60

Weight : 191 lb

Page Under Construction, Thank you for your patience and be sure to check back for more Products!

Page Under Construction, Thank you for your patience and be sure to check back for more Products!

Page Under Construction, Thank you for your patience and be sure to check back for more Products!

CAUTION – TOW ROPES CAN BE DANGEROUS. USE WITH CARE!NEVER ATTACH THIS ROPE TO A CHAIN!!!

*When attaching this rope to a vehicle that is going to be pulled, or to a vehicle that is going to pull it, never attach the rope to a hook, clevis, chain, cable or other metal object that is weaker than the rated strength of this rope. To do so will create a dangerous condition in that even thought the rope will not break, the hook, clevis, chain, cable or other metal object to which the rope is attached may tear from the vehicle with extreme force which might result in property damage, bodily injury or even death.

*Inspect the rope each time prior to its use and never use a cut of damaged rope.

*Never allow the rope to come into contact with metal surfaces during usage except at designed connection points on each end. Use slide protectors if provided on the rope to prevent such contact when possible. If not possible, do not use the rope!

*Never use a rope to pull with if load to be pulled is in excess of the rated strength of the rope as shown.

T12.5

Use for pick-ups and cars 12,500# tensile – 1″diam.

T25

Use for 1/2 ton four wheel drive pick-ups

25,000# tensile – 1 3/8″ diam.

T37.5

Use for 3/4 to 2 ton trucks and small tractors

37,500# tensile – 1 5/8″diam.

T50

Use for large two wheel drive tractors

50,000# tensile – 2″diam.

T62.5

Use for front wheel asst. & small 4wheel drive tractors62,500# tensile – 2 1/4″diam.

T75

Use for large four wheel drive tractors and semis

75,000# tensile – 2 1/2″diam.

T100

Use for combines and fertilizer spreaders

100,000# tensile – 3″diam.

T125

Use for large combines and heavy duty use

125,000# tensile – 4″diam

T150

Heavy-duty use and vehicles with tracks

150,000# tensile -5″diam.

Page Under Construction, Thank you for your patience and be sure to check back for more Products!

Puma 5-HP 80-Gallon Two-Stage Air Compressor
Motor:

Voltage: 208-230 Volt AC

Phase: 1-Phase

Magnetic Starter: Yes

Recommended Breaker: Consult Certified Electrician

Engine:

Horse Power: 5

Pump:
CFM: 18.3
CFM Rated @ 90 PSI
Pump Material: Solid Cast Iron
Pump Type: Two-Stage
Max PSI: 175 PSI
Oil Sight Glass: Yes
After Cooler: No
Pump Drive: Belt Drive
Oil Type: Oil Lubricated
Oil System: Splash Lubricated
Pump Low Oil Shut-off: No
Tank:
Tank Size: 80 Gallons
Tank Outlet: 1/2 Inch
Electronic Drain Valve: No
Tank Orientation: Vertical
Overview:
Certification: ASME
Weight: 560 Pounds
Puma 5-HP 40-Gallon Two-Stage Air Compressor
Motor:

Voltage: 208-230 Volt AC

Phase: 1-Phase

Magnetic Starter: No

Recommended Breaker: Consult Certified Electrician
Engine:
HP: 5
Pump:
CFM: 14
CFM Rated @  90 PSI
Pump Material: Solid Cast Iron
Pump Type: Two-Stage
Max PSI: 175 PSI
Oil Sight Glass: No
After Cooler: No
Pump Drive: Belt Drive
Oil Type: Oil Lubricated
Oil System: Splash Lubricated
Pump Low Oil Shut-off: No
Tank:
Tank Size: 40 Gallons
Tank Outlet: 1/2 Inch
Electronic Drain Valve: No
Tank Orientation: Vertical
Overview:
Certification: ASME
Weight: 280 Pounds
Product Length: 24 Inches
Product Width: 28 Inches
Product Height: 54 Inches
Puma 5.5-HP 20-Gallon (Belt Drive) Air Compressor w/ Honda Engine
Engine:

HP: 5.5

Engine Brand: Honda GX

Starting System: Recoil Start
Pump:
CFM: 11
CFM Rated @ 90 PSI
Pump Type: Single-Stage
Max PSI: 135 PSI
Oil Sight Glass: No
After Cooler: No
Pump Drive: Belt Drive
Oil Type: Oil Lubricated
Pump Low Oil Shut-off: No
Tank:
Tank Size: 20 Gallons
Tank Outlet: 1/4 Inch
Electronic Drain Valve: No
Tank Orientation: Horizontal
Overview:
Weight: 202 Pounds
Product Length: 43.5 Inches
Product Width: 17.5 Inches
Product Height: 34.5 Inches
Puma 5.5-HP 8-Gallon Gas Wheelbarrow Air Compressor w/ Honda Engine
Engine:
HP: 5.5
Engine Brand: Honda GX
Starting System: Recoil Start
Engine Low Oil Shut-off: No
Pump:
CFM: 9.2
CFM Rated @ 90 PSI
Pump Type: Single-Stage
Max PSI: 135 PSI
Oil Sight Glass: No
After Cooler: No
Pump Drive: Belt Drive
Oil Type: Oil Lubricated
Oil System: Splash Lubricated
Pump Low Oil Shut-off: No
Tank:
Tank Size: 8 Gallons
Tank Outlet: 1/4 Inch
Electronic Drain Valve: No
Tank Orientation: Horizontal
 Overview:
Weight: 183 Pounds
Product Length: 42 Inches
Product Width: 20 Inches
Product Height: 26 Inches
Puma 2-HP 4-Gallon Contractor Twin Stack Air Compressor
Motor:
Voltage: 115 Volt AC
Phase: 1-Phase
Magnetic Starter: No
Engine:
 HP: 2
Engine Low Oil Shut-off: No
Pump:
CFM: 4.6
CFM Rated @ 90 PSI
Pump Material: Aluminum w/ Cast Iron Sleeve
Pump Type: Single-Stage
Max PSI: 135 PSI
Oil Sight Glass: No
After Cooler:  No
Pump Drive: Direct Drive
Oil Type: Oil Lubricated
Pump Low Oil Shut-off: No
Tank:
Tank Size: 4 Gallons
Tank Outlet: 1/4 Inch
Electronic Drain Valve: No
Tank Orientation: Horizontal
Overview:
Weight: 75 Pounds
Product Length: 19.2 Inches
Product Width: 19.6 Inches
Product Height: 18.8 Inches